This manual will familiarize you with the assembly, operation, and The patented BeerGun® is the lowest foaming and lowest oxygen pickup filler on the market them or have any questions, contact your retailer or Blichmann Engineering™. The Blichmann Beer Gun is one such device; I recently acquired one and once First up, heed the warnings on the instructions–the beer gun is not designed to. In this video I set up my Blichmann bottle filler beer gun. There are of course instructions, the filler itself, beer line, and a cleaning brush is all you get with the.
|Country:||Saint Kitts and Nevis|
|Published (Last):||20 July 2012|
|PDF File Size:||2.74 Mb|
|ePub File Size:||19.22 Mb|
|Price:||Free* [*Free Regsitration Required]|
It comes with an instruction set that covers assembly it comes assembled in-box; you need to disassemble it, sanitize the components, and reassemble it before first useconnecting the gas and beer lines to the beer gun, and how to fill bottles with it. If I do they begin to leak CO2 from instguctions seals. Cool, that was easy once you get started. Setting it up is a bit of an ordeal but no more involved than bottling by hand with priming sugar.
I am planning on getting one of these but I have a question for you. There are of course instructions, the filler itself, beer line, and a cleaning brush is all you get with the basic kit. The instructions are adequate instructilns these purposes. Posted by Vince Feminella at At this point, use the CO2 button to displace the air.
How To Bottle With The Blichmann Beer Gun – Cidersage
When I received my gun I found that the main tube and connectors were already assembled and I could skip over the pages that explained how that part of the assembly should be done. It will clear the head space and get rid of some of the air.
Bottle a portion of your batch, leaving the blichmsnn available on draft. From unstructions it depends on your setup. A bench vise was needed to hold the gauge body from turning as I applied a good deal of torque needed to unscrew the shut off valve from the gauge body. This is a dispensing configuration with the keg under pressure constant pressure. Co2 Gauge Modification For Second Gas Line After guun the shut off valve from the gauge body I wrapped Teflon tape around it’s threads and the threads of the second shut off valve and then put the wye fitting snugly into the vise to hold it steady.
I am glad I have mine. Once the brass flare connector is installed on the gun the gas line tubing is used to connect the Beer Gun to a threaded flare connection on a ball lock gas line connector sold separately.
How To Use The Blichmann Beer Gun Bottle Filler
Putting the gauge back into the vise I geer the adjustable wrench to tighten the wye fitting snugly into to gauge body. In this video I set up my Blichmann bottle filler beer gun.
It was fast, you could fill a ton of bottles really quickly. To make the remaining connections needed in order to use the Beer Gun I used the additional parts that came with the Beer Gun Accessory Kit. That it, it actually goes back pretty quickly with some practice.
I plan on leaving my kegs of carbonated beer inside the refrigerator to keep cold the entire time I bottle my beer. Now the rest of b,ichmann can be cleaned as well. I quickly found out that I would need a bench vise to hold the gauge body in place while I unscrewed the parts from it. Since I have an extra connector for the beer out, I can disconnect that part on the kegerator and blichnann it up.
I agree the benefits of bottling carbonated beer using the beer gun far outweigh the time spent setting up.
I won’t go back to bottling any other way on my homebrew setup. With beet of the parts on hand I carefully removed the existing gas line shut off valve from the Co2 gauge body using an adjustable wrench.
So squeeze it quickly, once it starts to fill, then stand the bottle up and let it continue. Installing and using the Beer Gun was a fun project to install and use and I look forward to having the ability now to bottle my beer without ever having to use priming sugar again.
Approximate times in the video are noted for reference. The new beer line is connected to gun and the beer out post of the keg inside the refrigerator. I also find this the most convenient way to full growlers.